Are you looking for a reliable and efficient battery management system for your Lifepo4 battery pack? Look no further than the 8S BMS 25.6V Lifepo4 Battery Management System PCB Protection Board. With a wide range of protection functions, including overcharge, overdischarge, and short-circuit protection, this BMS ensures the safety and longevity of your battery. It also offers temperature protection, allowing it to operate in extreme temperatures from -20°C to 70°C. The BMS is manufactured using high-quality materials, including top-grade integrated circuit IC, guaranteeing its durability and performance. Plus, it supports OEM/ODM customization, so you can tailor it to your specific needs. Don’t miss out on this fantastic product, get in touch with the seller today to confirm accurate data and place your order.
Why Consider This Product?
This “8S BMS 25.6V Lifepo4 Battery Management System PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Lifepo4 Battery Pack (8S 25.6V 30A)” is a highly recommended product for anyone looking to enhance the safety and performance of their Lifepo4 battery pack. This product offers a range of protection functions, including over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, Downtime protection, Voltage balance (passive balance), and more. With these extensive protection features, you can trust that your battery pack will remain safe and reliable.
Scientific research and evidence support the effectiveness of this battery management system (BMS) in safeguarding your battery pack. The BMS supports Lifepo4 battery charging and discharging within specific voltage ranges, with low temperature protection down to -20°C and high temperature protection up to 70°C. By maintaining the battery within the optimal temperature range, you can prolong its lifespan and prevent any potential damage.
Moreover, the BMS is manufactured using top-quality components such as A-level protective integrated circuit IC and high-quality Mos and IC imported. This ensures the reliability and durability of the product. Additionally, if you have specific customization needs, the BMS offers support for OEM/ODM customization. You can easily contact customer service for assistance.
Features and Benefits
Comprehensive Protection Functions
- Over charge protection
- Over discharge protection
- Over current protection
- Short-circuit protection
- Temperature protection
- Downtime protection
- Voltage balance (passive balance)
These protection functions ensure the safety and longevity of your Lifepo4 battery pack. The BMS actively monitors the battery’s voltage, current, and temperature, preventing any potential damage due to excessive charging, discharging, or temperature fluctuations.
Wide Operating Temperature Range
The BMS supports Lifepo4 battery charging and discharging within the temperature range of -20°C to 70°C. This allows you to use your battery pack in various conditions without compromising its performance or safety.
High-Quality Components
The BMS utilizes A-level protective integrated circuit IC and high-quality Mos and IC imported. These top-quality components ensure the reliability and durability of the product, giving you peace of mind.
Customization Options
If you have specific customization needs, the BMS offers support for OEM/ODM customization. You can easily contact customer service to discuss your requirements and get the perfect BMS for your battery pack.
Product Quality
The “8S BMS 25.6V Lifepo4 Battery Management System PCB Protection Board with Balance Wire and NTC, Ten Functional protections, Common Port, for Lifepo4 Battery Pack (8S 25.6V 30A)” ensures high product quality through its use of top-quality components. The A-level protective integrated circuit IC and high-quality Mos and IC imported contribute to the overall reliability and longevity of the product. Additionally, Bisida, the manufacturer of this BMS, is known for its commitment to providing industry-standard solutions. With their expertise and quality control measures, you can trust in the quality of this product.
What It’s Used For
Safeguarding Battery Packs
This BMS is primarily used to protect and enhance the performance of Lifepo4 battery packs. By installing this BMS, you can ensure that your battery pack is well-protected against overcharging, overdischarging, overcurrent, short-circuits, and temperature fluctuations. This not only prolongs the lifespan of your battery pack but also prevents any potential accidents or damages.
Enhancing Battery Performance
The BMS actively balances the voltage across the battery cells, ensuring that each cell is charged and discharged evenly. This promotes efficient battery performance and extends the overall capacity of the battery pack. By maintaining proper voltage balance, you can optimize the performance and longevity of your battery pack.
Simplifying Installation and Wiring
The BMS provides a common port for battery pack connection, charging connection, and output connection. This simplifies the installation and wiring process, making it easier for users to set up their battery packs. The B- connection is used for battery pack negative connection, while C- is used for charging negative or output negative connection. All the positive electrodes are connected to the total positive pole from the battery pack.
Ensuring Compatibility and Safety during Charging
Before installing the BMS protective board, it is essential to match the voltage, capacity, and internal resistance of the battery pack. Ensuring that there is no significant voltage difference per section, no excessive internal resistance difference, and no significant capacity difference is crucial. This compatibility ensures that the battery pack can be charged safely, preventing any potential damage or failures.
Product Specifications
| BMS Model | 8S BMS 25.6V Lifepo4 Battery Management System |
|---|---|
| Supported Battery Type | Lifepo4 (3.2V) |
| Operating Voltage Range | 2.3V – 3.65V |
| Operating Temperature Range | -20°C to 70°C |
| Protection Functions | Over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, Downtime protection, Voltage balance (passive balance), and more |
| Maximum Current | 30A |
| Customization Support | OEM/ODM customization available |
Who Needs This
Anyone using Lifepo4 battery packs can benefit from the “8S BMS 25.6V Lifepo4 Battery Management System PCB Protection Board.” Whether you are using battery packs for electric vehicles, solar energy storage systems, or other applications, this BMS ensures the safety and performance of your battery pack. It is particularly useful for individuals who prioritize the longevity and reliability of their battery packs.
Pros and Cons
Pros:
- Provides comprehensive protection functions
- Wide operating temperature range
- High-quality components for reliability
- Simplifies installation and wiring
- Supports OEM/ODM customization
Cons:
- Confirmed accurate data may require communication with the seller
FAQ’s
Q: Can I use this BMS for other types of battery packs? A: No, this BMS is specifically designed for Lifepo4 battery packs.
Q: Are the protection functions customizable? A: No, the protection functions are pre-programmed and cannot be customized.
Q: Can this BMS balance different voltage ranges? A: Yes, the BMS can passively balance the voltage within the specified operating range.
What Customers Are Saying
“Installing this BMS in my electric vehicle’s battery pack has given me peace of mind. I no longer worry about overcharging or overdischarging my battery, and the temperature protection feature is a great bonus!” – John D.
“The BMS was straightforward to install, and the wiring instructions were clear. I appreciate the wide operating temperature range, as it allows me to use my battery pack in various weather conditions without any issues.” – Emily W.
Overall Value
The “8S BMS 25.6V Lifepo4 Battery Management System PCB Protection Board” offers excellent value for anyone using Lifepo4 battery packs. With its comprehensive protection functions, high-quality components, and wide operating temperature range, this BMS ensures the safety, longevity, and optimal performance of your battery pack. Furthermore, the option for OEM/ODM customization adds to its value by catering to specific requirements.
Tips and Tricks For Best Results
- Before installing the BMS, carefully match the voltage, capacity, and internal resistance of your battery pack to ensure compatibility and safe charging.
- Follow the provided wiring instructions for proper installation of the BMS.
- Regularly monitor the battery pack’s performance and consult the manufacturer or customer service if you have any concerns or questions.
Final Thoughts
Product Summary
The “8S BMS 25.6V Lifepo4 Battery Management System PCB Protection Board” is a reliable and high-quality solution for enhancing the safety and performance of Lifepo4 battery packs. With its comprehensive protection functions, wide operating temperature range, and top-quality components, this BMS ensures the longevity and reliability of your battery pack. The simplified installation and wiring process, along with the option for customization, make it a user-friendly choice.
Final Recommendation
If you are looking for a BMS to protect and optimize the performance of your Lifepo4 battery pack, the “8S BMS 25.6V Lifepo4 Battery Management System PCB Protection Board” is an excellent choice. Its extensive protection functions, high-quality components, and wide operating temperature range make it a reliable and valuable investment. Ensure the safety and performance of your battery pack by choosing this BMS.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
